The HIGHSIDER AKRON-FLASH LED Bar End DRL/ Turn Signals pack a white daytime running light and an amber turn signal into a single unit. The LED light has a horizontal adjustment of up to 26 degrees to place the light where you need it most. CNC machined aluminum housing and paired with a smoked lens. Pre-wired 40″ wire leads ensure adequate length for internal handlebar wiring. Universal for 7/8″ and 1″ Handlebars. E-approved.
Width: 1.41″ (36mm) Diameter: 1.35″ (34.5mm) Cable length: approx. 40″ (1000mm)
Power consumption: 13.5V, 0.27A, 3.65W and 13.5V, 0.11A 1.49W
Connections:: Yellow cable = turn signal (+)
White cable = running light (+)
Black cable = ground (-)
Scope of delivery: 1 pair
Accessory TIP: The Highsider PL Control Box CB2 (PN 208-109) switches the position light off during the flashing process and goes on again after the flashing process (with a small delay).
Note: Not for use as a bar end mirror mount.